Drop the plan in
Upload the PDF or image, then establish the scale using a known dimension.
AI-BASED STONE & COUNTERTOP TAKEOFF
Automate your countertop takeoffs with AI.
AI stone and countertop takeoff software that detects countertop geometry in PDF plans. Review the results and carry quantities into estimates and bids.
Book a demo- Bring in
- A PDF, JPG, or PNG plan with a legible known dimension for setting the scale.
- Get out
- AI-detected or manually drawn countertop geometry and quantities for material, edge, and cutout pricing.
- You review
- Plan scale, detected boundaries, measurements, and missing details. Edit or trace pieces as needed; field templating remains a separate step.
WATCH THE AI TAKEOFF WORKFLOW
Less tracing. More bids out the door.
Let 2cm.ai find the countertops in your PDF drawings. Automate the repetitive takeoff work so your team can spend less time tracing plans and get more bids and estimates out to customers.
Review the detected pieces, check the scale and fabrication details, then carry the takeoff into an estimate using your shop’s rates. Watch the workflow in the demo.
Take the next step into quotingSee AI-assisted countertop and stone takeoff automation in 2cm.ai’s estimating workflow.
Watch on YouTubeAI COUNTERTOP DETECTION
From PDF detections to a 3D layout.
Work directly from the PDF drawing. Let AI identify countertop locations, then review the highlighted results against the source plan. Accept, edit, or trace the geometry you need for the estimate.
The CoFab recording at the top of this page follows two vanity countertops from the highlighted PDF into editable shapes and a 3D view. Review the room assignments, sink openings, edge details, and dimensions before applying your material and service rates.
Follow the takeoff into a quote3D detail from the October 31, 2026 recording. Clip length is not a promised processing or quoting time. Watch the full recording on YouTube.
AI does the first pass. Your estimator reviews the result.
A manual takeoff starts with finding and tracing the pieces on a plan. 2cm automates countertop detection in the drawing and turns the results into geometry you can review and edit. That takes work out of identifying and redrawing the countertop areas before estimating begins.
Check detected pieces against the source plan, correct the geometry, and confirm scale, returns, edges, and cutouts. The reviewed quantities then continue into materials, slab planning, and pricing in the same workflow. Drawing quality and project complexity affect how much correction is needed.
A takeoff is the start of the bid.
Check the scope before pricing: countertop runs and islands, returns, backsplashes or waterfall pieces, edge treatments, sinks, and cooktops. Review the geometry and scale against the drawing. A missed return or cutout changes the work you are estimating even when the main surface looks right.
Carry the reviewed pieces into material selection, seam and slab planning, and an itemized estimate. Apply your shop’s rates, revise the scope, and check the customer proposal before issuing the bid.
See estimating and dynamic pricingReview the details directly on the plan.
The recording at the top of this page shows two vanity countertops detected on a PDF drawing. Review room assignments, sink openings, edge details, and the generated shapes against the source plan.
The clip then opens the same pieces in 3D. Check the detail notes and dimensions before carrying the reviewed quantities into your shop’s pricing.
Three steps.
From plan to proposal.
AI detects. You review.
AI identifies countertop areas in the drawing. Review the detected geometry, correct or add pieces, and verify dimensions and fabrication details.
Hand them the bid
Select materials, apply your rates, and review the itemized customer quote.
Keep the takeoff connected to the estimate.
AI PDF detection is included in Quote and higher plans. After reviewing the drawing, continue with materials, automatic slab nesting, 3D design review, and your shop’s pricing.
Explore countertop quoting softwareBUILT FOR STONEA takeoff tool that thinks
A takeoff tool that thinks
like a fabricator.
Scale you can check
Calibrate against a known measurement and keep the drawing available for review.
Edges and cutouts that count
Bring edge lengths, sinks, cooktops, and faucet holes into the pricing conversation.
Keep the rooms together
Organize the countertop pieces across the job without rebuilding the estimate.
Your shop. Your quote.
Present the materials, services, and rates your shop actually uses.
KEEP EXPLORING
More on drawings and takeoffs.
BEFORE YOUR FIRST JOB
A few practical answers.
Can AI take off countertops directly from a PDF drawing?
Yes. Upload the PDF and use AI to identify countertop locations. Review the scale, detected geometry, and unique pieces against the drawing; edit or trace parts as needed. Then check surface area, edge lengths, and cutouts before applying your shop’s rates. AI PDF detection is included in Quote and higher plans.
Which plan formats can I start with?
The takeoff workflow supports PDF plans and JPG or PNG images. Use a legible drawing with a known dimension so you can establish scale and review the geometry. A clear plan is more useful than an image with unreadable dimensions.
Does a takeoff replace field templating?
No. A plan-based takeoff supports estimating. Verify site conditions and final dimensions through your shop’s field measurement and templating process before fabrication.
How do the measurements become a price?
The takeoff supplies quantities such as surface area, edge length, and cutout counts. Select the material and apply your shop’s rates and services. Review the itemized quote so scope assumptions and fabrication details are clear before sending it.
What does 2cm cost?
The Quote plan is $249 per month, and Quote + Manage is $499 per month, in USD. Enterprise pricing is custom. AI PDF detection, automatic slab nesting, and 3D rendering are included in Quote and higher plans. Compare the included features and current plans.
Can 2cm connect to my other software?
Custom integrations are listed under Enterprise. Bring the names of your existing systems and the data you need to move to the demo. Confirm the integration scope, availability, and any additional work before choosing a plan.
YOUR NEXT CHAPTER STARTS HEREGood work deserves
Book a demo Good work deserves
a better workflow.
Bring a drawing, a price sheet, or a job that got complicated. Let’s see how 2cm can help your shop.